Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: LJ-9
Brand: SIHAI
Certification: ISO
Warranty: 1 Year
Service Life: <15 Years
Voltage: 380V
Structure: Horizontal
Cooling: Water Cooling
Pressure: Atmospheric
Heating Method: Directly
Installation: Foundation
Working Form: Batch
Reactor Size: 2200*6600 Mm
24 Hours Oil Output: 3.2-4.5 Tons Fuel Oil
Weight Of Reactor: 29 Tons
24 Hours Processing Capacity: 8-10 Tons Raw Material
Packaging: Seaworthy packing 2*40HQ
Productivity: 200 sets per year
Transportation: Ocean
Place of Origin: Henan
Supply Ability: 200 sets per year
Certificate: CE ISO
HS Code: 8419409090
Port: Lianyungang,Qingdao
Payment Type: L/C,T/T,Western Union
Incoterm: FOB,CIF
Introduction of High-producing tires cracking to fuel oil machine
This plant does not have to get rid of silt, moisture content, iron wire impurity and so on from the scrap plastic, directly loads in the rotary system high temperature atmospheric pressure split processor, catalyses, heats up, distils oil steam, the oil gas through the condenser, the liquefied part condense into the oil mixture, and the unliquefied part holds through the fuel gas system into the processor bottom to burn.After the mixture oil condense, put into fractionation processor to heat though catalytic reforming process, and get the oil steam. Then the oil steam through the condenser to be basic fuel, and add various additives to become qualified fuel.
Main components of High-producing tires cracking to fuel oil machine
a. Host horizontal rotary pyrolysis processor.
b. Feeding system
c. Pressure and temperature alarm system
d. Secondary catalytic tower
e. Automatic slag removal system
f. Central electronic control system
g. Tank cooling system
h. Gas heating system (exhaust gas treatment system)
i. Dust and dust removal system
Working process of High-producing tires cracking to fuel oil machine
1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;
2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.
3. Cooling, oil and gas condenses into fuel oil through the cooling system;
4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;
5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.
Treatment of the raw material
↓
Hydraulic automatic feeding in
↓
Automatic slag-out ← pyrolyzer → desulphurization and deduster
↓ ↓
Air package draft fan
↓ ↓
1st tube condenser first 2nd purifier
↓ ↓
2nd tube condenser second 2nd purifier
↓ ↓
Cooling tower ← calandria condenser emission reach the standard
↓
Oil and gas separator product oil
↓
Water seal explosion-proof machine
Exporting experience from High-producing tires cracking to fuel oil machine
America: | Brazil, Canada, Colombia, USA, |
Middle East: | Dubai, Iran, Jordan, Saudi Arabia, Turkey |
Europe: | Albania , Bosnia and Herzegovina |
Asia: | Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar,Thailand |
Africa: | Ghana, Mozambique, Zambia |
Environment of High-producing tires cracking to fuel oil machine
Dispose waste gas, liquid, and residua in the process:
a. Waste gas: Transferred through two safety device: water seal &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.
b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless wa ste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)
c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the thick black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material).
Product Categories : Waste Plastic Pyrolysis Plant
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.